12V Automatic Rebar Tying Machine - Handheld Steel Strapping Tool for 8mm-34mm Rebar with Miniature Motor (Orange) | Perfect for Construction, DIY Projects & Concrete Reinforcement Work

Product Description

More information Contact seller!Specifications：Color:blue/orange（for choice）Material: Plastic + MetalVoltage: 12VBattery: Lithium Ion BatteriesBattery Capacity: 1500 mAhBattery Charging Time: 1.5 hours full fillingTying Wire Diameter: 0.8mmTying Wire Length: more than 110 mApplicable Scope Of Steel Strapping: 8mm - 34mmKnot Wire Length: 300 - 500mmKnot Number Per Charge: 1500 timesKnot The Required Time: 0.8 seconds at a timeMachine Size: 275 mm * 65 mm * 240 mm / 10.83''x2.56''x9.45''(appr.)Tying Wire Installations：1. In the state of start-up, press the locking plate of the opening wire plate, open the plate cover.2. Take out the tying wire, tear the packaging film, pull straight wire head about 10 cm, load into the binding machine in the clockwise direction, the wire head into the guide tap tube.3. Insert the head of the wire guide into the tap pipe until it is resisted.4. Cover the plate and fasten the locking piece.5. Pinch the wire forward with two fingers, press and hold the switch and send the wire out.6. If you want to take out the wire plate when finished, press and hold the locking piece, open the wire plate cover plate, holding the wire tray to the side and pull out.Operating Skills：1. In use, the left tilt 45 degrees after banding, the next time the banding into a right tilt 45 degrees banding, left and right alternately banding.2. When the machine is about to tighten, the machine will appear slightly shaking, while holding the hand of the machine not too tight, you can relax properly.